Speed panel is broken

hardik

network speed monitor shows this

![
](https://)

while tcptrack shows this

network monitor doesn't work, ubuntu

hardik

And when i do speedtest, this is result

aaPanel_Kern

hardik
Hi, I don't understand what it means. Please explain in details

hardik

network speed monitor is showing the wrong data,

I got confused as my server used 4TB of bandwidth while having no storage difference.

I got into the details and found that the network monitor is showing the wrong data.

started to track actual data from tcptrack and both were much different,

while tcptrack shows 11KB/s, network monitor showed 11MB/s

server details
Current version: aaPanel LinuxStable 6.8.26 Release time: 2022/07/15
Ubuntu 18.04.6 LTS x86_64(Py3.7.8)

aaPanel_Kern

hardik
Hello, here is the real-time upload and download data and the total upload and download data since the server was started. The data here is read from the system

hardik

aaPanel_Kern the real-time upload and download data

I know, but the data it shows and what tcptrack shows are different.

Realtime data showed 10MBps while tcptrack showed 10kbps,

can you share with me which command real-time data is used to get this info? want to try manually in the command line.

aaPanel_Kern

hardik
Where does the 10M come from? It is recommended to use iftop to view

hardik

aaPanel_Kern

Here is screenshot from iftop and monitor side by side

Also i found that, monitor shows upload/download speed at same. no difference at all.

aaPanel_Kern

hardik
Hello, can you capture the full picture? Does aapanel include all NICs?

hardik

Yes, it's all NICs.

Same server, according to it. I consumed 300GB of data more from the first screenshot I sent you.

Server config: : Azure
Ubuntu 20.04.5 LTS x86_64(Py3.7.9)
Current version: aaPanel LinuxStable 6.8.26 Release time: 2022/07/15

Look at TOTAL and rates, which is way low but below monitor shows 12MBps data in/out

From what I have seen and you can see as well in to "Rates" in screenshots, it counts 13KBps as 13MBps,

aaPanel_Kern

hardik
Hello, All includes all network cards. It is recommended to select the corresponding network card and check which one is used the most. iftop only checks one network card by default
Can the Azure management background also view the network traffic, and compare the traffic of the egress network card to see if it is consistent?