Hello, I’m a regular user of aapanel and appreciate the platform’s convenience. While using the panel, I’ve encountered several issues and have a few suggestions for improvement: phpMyAdmin and PHP 8.4 Compatibility When attempting to use phpMyAdmin with PHP 8.4, a warning appears stating that the PHP version is not supported, and the application does not function properly. I’ve temporarily switched to PHP 8.3. Please confirm whether phpMyAdmin officially supports PHP 8.4 or if this is a compatibility issue within aapanel. Also, the app store currently shows phpMyAdmin version 5.2.1 as the latest, whereas version 5.2.2 is actually available. Please verify if an update is planned. Panel Shutdown After Server Restart Restarting the server from the panel’s home interface causes the entire panel to shut down, and the server does not actually restart. The panel becomes unresponsive, and the only way to bring the server back is by connecting via SSH and manually executing the reboot command. This indicates that the restart process from the panel fails completely, leaving the server in an unusable state until manual intervention. Used Disk Space Displayed as 0MB in Quota Management In the “Quota Management” section for websites and databases, the used space is incorrectly shown as 0MB, even though considerable data is in use. Please clarify whether this feature is limited to Pro users, or if it’s a display bug. IPv4/IPv6 Port Binding Selection Currently, when a port is opened, both IPv4 and IPv6 are enabled by default. It would be useful to allow users to choose between All, IPv4 only, or IPv6 only. Incorrect IP in Login Notifications and OTP Info Login success emails and on-page messages show the server’s IP address instead of the client’s actual IP. This also occurs when Google OTP (two-factor authentication) is enabled—specifically in the message that says “You won’t need to enter OTP on this browser for 24 hours,” where Your IP incorrectly shows the server IP. Please fix this so the client IP is accurately displayed. Temporary Login Session Deletion Issue In the Temporary Login Management section, clicking “Force Logout” works as expected. However, using the “Delete” button removes the entry from the list but does not terminate the session, allowing the guest user to remain logged in. Please ensure deletion also ends the session. phpMyAdmin Version Switching Functionality Currently, to switch phpMyAdmin versions, the existing version must be uninstalled before manually installing another one. It would be more efficient if the Reinstall button allowed users to directly select and switch to a specific version (e.g., downgrade to 5.1 or upgrade to 5.2.2) without requiring manual removal. Thank you for your continued service, and I look forward to your response and support regarding these issues. Best regards.

Hello, I used the same OS to test it is normal, try to execute this command to set up the boot. systemctl daemon-reload systemctl enable btpanel if(window.hljsLoader && !document.currentScript.parentNode.hasAttribute('data-s9e-livepreview-onupdate')) { window.hljsLoader.highlightBlocks(document.currentScript.parentNode); } The login IP problem is also normal. You can view the IP I logined in. jaehyun1122

Hello We are testing it. If there is no problem, it will be updated It takes a certain amount of time to restart the server. How long have you been waiting? What is your operating system and what version is it? Quota requires a professional version and the file system is XFS There is no such distinction at present, thank you for your suggestions My test is the client's IP. Do you use a tool like a VPN? Thanks for your feedback, we will test and fix it Thank you for your suggestions, we record it jaehyun1122

Multiple Bugs and Suggestions Found While Using aapanel

jaehyun1122

Hello, I’m a regular user of aapanel and appreciate the platform’s convenience.

While using the panel, I’ve encountered several issues and have a few suggestions for improvement:

phpMyAdmin and PHP 8.4 Compatibility
When attempting to use phpMyAdmin with PHP 8.4, a warning appears stating that the PHP version is not supported, and the application does not function properly. I’ve temporarily switched to PHP 8.3. Please confirm whether phpMyAdmin officially supports PHP 8.4 or if this is a compatibility issue within aapanel.
Also, the app store currently shows phpMyAdmin version 5.2.1 as the latest, whereas version 5.2.2 is actually available. Please verify if an update is planned.

Panel Shutdown After Server Restart
Restarting the server from the panel’s home interface causes the entire panel to shut down, and the server does not actually restart. The panel becomes unresponsive, and the only way to bring the server back is by connecting via SSH and manually executing the reboot command. This indicates that the restart process from the panel fails completely, leaving the server in an unusable state until manual intervention.

Used Disk Space Displayed as 0MB in Quota Management
In the “Quota Management” section for websites and databases, the used space is incorrectly shown as 0MB, even though considerable data is in use. Please clarify whether this feature is limited to Pro users, or if it’s a display bug.

IPv4/IPv6 Port Binding Selection
Currently, when a port is opened, both IPv4 and IPv6 are enabled by default. It would be useful to allow users to choose between All, IPv4 only, or IPv6 only.
Incorrect IP in Login Notifications and OTP Info
Login success emails and on-page messages show the server’s IP address instead of the client’s actual IP. This also occurs when Google OTP (two-factor authentication) is enabled—specifically in the message that says “You won’t need to enter OTP on this browser for 24 hours,” where Your IP incorrectly shows the server IP. Please fix this so the client IP is accurately displayed.

Temporary Login Session Deletion Issue
In the Temporary Login Management section, clicking “Force Logout” works as expected. However, using the “Delete” button removes the entry from the list but does not terminate the session, allowing the guest user to remain logged in. Please ensure deletion also ends the session.
phpMyAdmin Version Switching Functionality
Currently, to switch phpMyAdmin versions, the existing version must be uninstalled before manually installing another one. It would be more efficient if the Reinstall button allowed users to directly select and switch to a specific version (e.g., downgrade to 5.1 or upgrade to 5.2.2) without requiring manual removal.

Thank you for your continued service, and I look forward to your response and support regarding these issues.

Best regards.

aaPanel_Kern

Hello

We are testing it. If there is no problem, it will be updated
It takes a certain amount of time to restart the server. How long have you been waiting? What is your operating system and what version is it?
Quota requires a professional version and the file system is XFS
There is no such distinction at present, thank you for your suggestions
My test is the client's IP. Do you use a tool like a VPN?
Thanks for your feedback, we will test and fix it
Thank you for your suggestions, we record it

jaehyun1122

aaPanel_Kern
System Info: OS: Ubuntu 24.04 / VPS Provider: Contabo VPS / aaPanel Version: beta 7.34.0 (2025-04-29)

Issue 2 - Server Restart Problem: When I click "Restart Server" from the Server Home panel, the popup says "Shutting down websites" and then closes, but the server does not actually reboot. I waited over 1 hour and nothing happened. During this time, Cloudflare reported "Web server is down". The VPS itself was still running via SSH. Please check if this is a bug or compatibility issue with Ubuntu 24.04 or Contabo.

Issue 5 - Incorrect IP in Logs: I’m not using any VPN or proxy, but aaPanel shows the server’s own IP as the login/OTP source IP instead of my real client IP. I tried using the “Fix” button but it did not resolve the issue. Please investigate this bug.

Thank you.

aaPanel_Kern

Hi, can you give us your aapanel information? The server makes a snapshot backup first, if possible, please send it to kern@aapanel.com.
It is recommended to fill in the following
Post link:
SSH IP address, account password and port:
aapanel login link address and account password:
Detailed problem description:

No post link will not be able to know which user's information is, and the problem will not be processed

jaehyun1122

aaPanel_Kern

Hello, I used the same OS to test it is normal, try to execute this command to set up the boot.

systemctl daemon-reload
systemctl enable btpanel

The login IP problem is also normal. You can view the IP I logined in.

jaehyun1122

aaPanel_Kern
I've sent you an email, please check it out!

jaehyun1122

aaPanel_Kern

Just in case, I tried creating a new server and restarting it, but it doesn't seem to work without nginx.

aaPanel_Kern

jaehyun1122
Yes, this is a known problem

jaehyun1122

aaPanel_Kern
Thank you for your assistance. We will wait until all remaining bugs have been resolved.