It seems that when using Openlightspeed php is installed at /usr/local/lsws/lsphp84/ but CLI is used from /www/server/php/84 also when making changes to php from AppStore it will make the changes in /usr/local/lsws/lsphp84/ and not in /www/server/php/84.

it may be a problem with the detection method, so the prompt is not supported Due to taking care of the installation of small machines, aapanel uses the disabled fileinfo parameter by default. It may be that the disabled parameter is detected, so the prompt is not supported. You can use the following command to reinstall php with fileinfo enabled by default command line execution #Download php compile and install script wget http://node.aapanel.com/install/0/php.sh #Replace disable fileinfo parameter to enable sed -i "s/--disable-fileinfo/--enable--fileinfo/g" php.sh #Install php-7.4, if not 7.4, please replace 7.4 with your php version bash php.sh install 7.4

Hello, thank you for your feedback, I suggest you use the full php path first virgiltu

aaPanel_Kern thank you. Yes that is what i did when trying to run composer or other things like that. I just wanted to put some eye one it for the next update

aaPanel_Kern the issue seems to be with php8.4 in general not with openlightspeed. i installed php8.4 and it shows that some extensions are installed by default but they are not. I tired doing a fresh install and the same thing will happen. My install is 7.0.21

Hello, It is recommended that you use phpinfo as the basis virgiltu

aaPanel_Kern There is definitely an issue. I use the server to run a laravel application. This application requires extension fileinfo. If you install Nginx with PHP 8.3 no modules show as installed. If you remove Nginx and install Openlightspeed and you look at PHP 8.3 you see several modules as installed but when trying to use them the system is reporting as they are disabled. I checked the phpinfo and it shows that fileinfo is disabled. If i remove Openlighspeed and install Nginix again it all works and i can install and uninstall the extension fileinfo. You can than use the fileinfo extension. I am super confused why this is happening because i do not touch anything in php8.3 and this is the same for 8.4 and all the others. I do not see anywhere that openlighspeed installed these modules for php so is this a configuration issue?

Hello, yes, the default nginx uses php will ban fileinfo when installed If you use Openlightspeed please use the full lsphp path virgiltu

is php8.4 ready with OLS? i try to install but no success, on a clean server i installed OLS first and then try to install PHP 8.4 but it wont to install PHP. any clue

Hello What is your operating system? vPlay

Try installing manually using the command wget http://node.aapanel.com/install/4/php.sh wget http://node.aapanel.com/install/4/php-ols.sh bash php.sh install 4.4 bash php-ols.sh install 8.4 vPlay

Openlightspeed and PHP8.4

aaPanel_Kern

Hello, is it normal to try to install manually?

yum remove lsphp81-* -y
wget https://node.aapanel.com/install/4/php-ols.sh 
bash php-ols.sh install 84

mateus1020

No, i try to install manually because i can't install by panel.

Why do i have to uninstall the lsphp81 for to install lsphp84?

aaPanel_Kern

Hello,
I suggest you test it first?

mateus1020

Hi!

]# bash php-ols.sh install 84
selecting download node...
begin to install lsphp84
Last metadata expiration check: 4:02:23 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-common
Last metadata expiration check: 4:02:38 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-common-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-gd
Last metadata expiration check: 4:02:48 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-gd-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-process
Last metadata expiration check: 4:02:55 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-process-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-mbstring
Last metadata expiration check: 4:03:03 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-mbstring-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-xml
Last metadata expiration check: 4:03:17 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-xml-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-mcrypt
Last metadata expiration check: 4:03:27 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
No match for argument: lsphp84-mcrypt
Error: Unable to find a match: lsphp84-mcrypt
begin to install lsphp84-pdo
Last metadata expiration check: 4:03:36 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-pdo-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-imap
Last metadata expiration check: 4:03:44 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-pecl-imap-1.0.3-1.el8.8.4.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-mysqlnd
Last metadata expiration check: 4:03:51 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-mysqlnd-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-sqlite3
Last metadata expiration check: 4:03:58 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-pdo-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-zip
Last metadata expiration check: 4:04:06 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-zip-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
begin to install lsphp84-curl
Last metadata expiration check: 4:04:15 ago on Thu 06 Nov 2025 10:51:39 AM UTC.
Package lsphp84-common-8.4.14-1.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
[OK] Send SIGUSR1 to 370076

mateus1020

And now?

aaPanel_Kern

Hello, is the problem solved? It seems that the installation is normal

mateus1020

No, is not working on panel and not appear on the app store

The lsphp84 does not appear to the select

aaPanel_Kern

Install php8.4
wget https://node.aapanel.com/install/4/php.sh
bash php.sh install 8

mateus1020 4

mateus1020

Hi, the end of prompt:

/bin/ld: dynamic STT_GNU_IFUNC symbol mb_utf16be_to_wchar' with pointer equality inext/mbstring/libmbfl/filters/mbfilter_utf16.o' can not be used when making an executable; recompile with -fPIE and relink with -pie
collect2: error: ld returned 1 exit status

make: *** [Makefile:285: sapi/cli/php] Error 1

Rocky Linux release 8.10 (Green Obsidian)
Bit:64 Mem:957M Core:2 gcc:8.5.0 cmake:3.26.5
Linux 4.18.0-553.16.1.el8_10.x86_64 x86_64
ERROR: php-8.4.14 install failed.
Please submit to https://www.aapanel.com/forum for help

aaPanel_Kern

Hello,
Is it okay to try to deal with it by referring to this post?

https://www.aapanel.com/forum/d/24998-cannot-install-php-84/4

mateus1020

Thanks!

« Previous Page